SGK5-05 is a 5.0 mil (0.127 mm) thick Para-aramid tape designed to protect the integrity of the wire insulation for wire harnesses mostly in aerospace where standard fiberglass insulation tape is insufficient to meet the demands of abrasion resistance and high temperature.
It is used in specific maintenance procedures to protect wires that are held by clips. It provides protection from the vibration of the airplane to prevent the metal wire clip from cutting through the wire’s insulation.
SGK5-05 meets General Electric specification A22C7 and comes with ATS and Manufactuer’s Certificate of Conformance with full test reports.
We offer free shipping and next day delivery for orders placed by 1pm EST.
Call 800-793-6307 or email email@example.com for contract and distributor pricing.
SGK5-05 is manufactured from extra-strength, para-aramid (phenyleneterephthalamide) fiber cloth, impregnated with a dispersion of anti-static PTFE (polytetrafluoroethylene). This high-performance coated fabric then has a layer of high temperature silicone adhesive applied to one side. The black pigmentation provides anti-static performance and protection from UV damage, to which para-aramid fiber cloth is susceptible. Resistivity of this version is less than 106 ohms/in2.
SGK5-05 is specifically designed to resist abrasion, and provide added strength in high temperature cable wrapping applications where standard fiberglass cloth do not provide adequate chemical resistance and/or low friction release.
The SGK5 tape is primarily used in aerospace for use with the specific maintenance procedures to protect wires that are held by clips. It provides protection from the vibration of the airplane, because the metal wire clip will cut through the insulation of the wire if there isn’t an additional layer of protection. The SGK5-05 meets spec General Electric A22C7 and is designed to protect the integrity of the wire insulation.
Low coefficient of friction
PTFE adds another dimension to harness wrapping by providing a measure of “lubricity”
Performance tests are run using standard test procedures.
The values presented are typical values and should not be used for specification purposes.
|Backing Material||PTFE Coated Para-Aramid Woven Fabric|
|Adhesive Type||Super Stick Silicone|
|Total Thickness||0.178 mm (7.0 mil)|
|Backing Thickness||0.127 mm (5.0 mil)|
|Adhesive Thickness||0.051 mm (2.0 mil)|
|Adhesion to Steel||2.7 N/cm (25 oz/in)|
|Tensile Strength warp × weft||350 × 350 N/cm (200 × 200 lb/in)|
|Elongation at Break||3%|
|Operating Temperature||-73 to +260 °C (-100 to +500 °F)|
General Electric A22C7
Comes with ATS and Manufacturer’s Certificate of Conformance with full test reports.
|Moisture Sensitivity Level (MSL)||1 (Unlimited)|
|REACH Status||REACH Unaffected|